English
Español
12 To 48 cores doom heat shrink seal fiber optic splitter closure 1 inlet 3 outlet
Read More
1. Trouble diagnosis:
Check the fiber optic splice closure: First, make sure the fiber optic cable connection is firm and reliable. Check the connector part of the optical cable to make sure it is not disconnected or loose. Using a fiber optic detector, check the signal strength at the connection to make sure it is within the expected range.
Optical fiber splicing inspection: Conduct detailed inspection of optical fiber splicing to ensure that the quality of the splicing meets standards. If there are any cracks, bubbles, or other imperfections, the splice may need to be redone.
Visual Inspection: Regularly conduct visual inspections of fiber optic fusion sealers to look for cracks, deformation, or other visible damage. If any abnormalities are found, repair or replace them promptly.
2. Use test equipment:
Optical fiber tester: Use an optical fiber tester to measure parameters such as fiber loss, attenuation and reflection. For example, by verifying the intensity of the light signal through a detector, you can locate areas where the signal is weakened and find the possible source of the problem.
Temperature detector: Use a temperature detector to monitor the temperature inside the optical fiber fusion sealer to ensure that it is within the specified working range. Abnormal temperatures may cause equipment performance degradation or damage.
3. Reconnect and splice:
Reconnect the optical cable: If you find that the optical cable connection is unstable, you can try to reconnect it. Make sure that when reconnecting, each fiber optic cable head is properly aligned and inserted snugly into the connector.
Re-splice the optical fiber: If the fiber splicing quality is poor, you can use a splicer to re-splice it. Before splicing, make sure the fiber end is clean and flat to obtain better splicing results.
4. Replace damaged parts:
Replace connectors and adapters: For worn or damaged connectors and adapters, replace them promptly to ensure the integrity of the connection. For example, if you notice scratches or deformation on the connector, you may need to replace it with a new one.
Replace seals: If the sealing performance of the closure is found to be reduced, it is necessary to replace the sealing ring or sealing strip. For example, high-quality rubber seals are used to ensure effective waterproofing in various environments.
5. Cleaning and maintenance:
Clean the interior: Clean the interior of the closure regularly, especially to remove dust, foreign objects or dirt. Use a pressure can to clean areas where dust may be present and ensure that the light path is clear.
Maintain waterproof performance: Regularly check the waterproof performance of the sealer to ensure that the seal is intact. Professional waterproof glue can be used for maintenance to ensure its long-term effectiveness.
6. Logs and records:
Record the fault phenomenon: For each fault, record the specific phenomenon, time and place of occurrence. This helps track and diagnose potential problems.
Maintenance log: Establish a regular maintenance log to record the specific steps of each maintenance and the status of the equipment after maintenance. This helps with preventive maintenance and troubleshooting.
7. Professional technical support:
Contact the manufacturer or supplier: If the problem cannot be solved in the above steps, contact the manufacturer or supplier of the optical fiber fusion sealer in time. They can provide professional technical support and possibly provide replacement or repair services.
24 48 96 144 core doom Vertical heat shrink seal fiber optic splitter closure 1 inlet 3 outlet
24 48 96 144 core doom Vertical heat shrink seal fiber optic splitter closure 1 inlet 3 outlet
Description:
Optical Splice Closures Are Used To Distribute, Splice, And Store The Outdoor Optical Cables Which Enter And Exit From The Ends Of The Closure. There Are Two Connection Ways: Direct Connection And Splitting Connection. They Are Applicable To Situations Such As Overhead, Man-Well Of Pipeline, Embedded Situation Etc. Comparing With Terminal Box,The Closure Requires Much Stricter Requirement Of Seal. Sealing Ring And Air Valve Are Required For Closure, But That Are Not Necessary For Terminal Box.
Features:
1). High Quality PPR Material Optional, Can Ensure Harsh Conditions Such As Vibration, Impact, Tensile Cable Distortion And Strong Temperature Changes.
2). Solid Structure, Perfect Outline, Thunder, Erosion And Adding Resistance.
3). Strong And Reasonable Structure With Mechanical Sealing Structure, Can Be Opened After Sealing And Cab Be Reused.
4). Well Water And Dust Proof, Unique Grounding Device To Ensure The Sealing Performance, Convenient For Installation.
5). The Splice Closure Has A Wide Application Range, With Good Sealing Performance, Easy Installation, Produced With High Strength Engineering Plastic Housing, With Anti-Aging, Corrosion Resistance, High Temperature And High Mechanical Strength And So On.
